After the installation of the cutting machine is completed, turn on the power to check whether the rotation of each part of the machine is flexible and whether the fasteners are lo
Check whether there is garbage at the main air inlet, and whether each valve and pressure gauge work normally.
The machine should be thoroughly cleaned every week, the horizontal and vertical guide rails, the transmission gear racks should be cleaned, and the lubricating oil should be fille
Every working day, the dirt on the machine tool and the guide rails must be cleaned to keep the bed clean.
After the operation, use tap water to rinse the slag on the surface of the studio and workbench and wipe it dry.
When the cutting machine is working, it is necessary to concentrate on it, not only to keep a clear mind, but also to operate the power tool rationally.
The performance of the equipment must be carefully checked before use to ensure the integrity of each component.
Automatic oil injection on both sides, the oil amount can be adjusted separately, the cutting surface has no burrs, and the saw blade is more durable;
Set by programmable PLC program, automatic feeding, automatic clamping, automatic sawing, automatic cycle work over and over again, high sawing precision, low vibration, low noise,
