How should the rubber rollers of the laminating machine be maintained? Specifically introduced as follows:
1, daily cleaning of the rubber roller must be carefully cleaned, otherwise it will make the surface layer of the rubber roller and pigment, resin oxidation natural layer of smooth and hard film, resulting in the surface vitrification and affect the ink transfer. If often clean, laminating machine roll surface will be uneven and bad use. Therefore, when the machine is stopped, the rubber roller should be washed and put on standby.
2, laminator rollers used for a long time aging, coupled with the corrosion of chemicals, resulting in rotten glue off the "dregs", it is best not to use such rubber rollers, otherwise it will seriously affect the quality of prints.
3, in order to ensure that does not affect the production and printing quality, there must be spare ink rollers, but do not store too much to avoid aging. Rubber roller storage environment and rubber blanket. In addition, the rubber rollers should be in the journal of a good straight frame, and the surface should not be in contact with each other or with other items, so as to avoid deformation of the rubber rollers.
4, laminating machine rubber roller should not be stored in the proximity of large electric ideas, generators. Due to the large amount of ozone generated by these devices will make the rubber roll surface aging and cracking.
5, when the day is cold, the ink does not hit evenly, you can add appropriate auxiliary materials in the ink, prohibit the use of infrared heaters and other equipment to bake the ink rubber rollers to prevent oxidation of the rubber rollers.
So in the use of laminating machine should pay attention to cleaning, rubber roller to scrub clean, you can use a note pad, clean cloth towel dipped in distilled water or alcohol wipe, no need to be too big, and then cool dry on it, pay attention to do not use laundry detergent, gasoline, detergents and so on detergents, because of cold laminating laminating machine rollers more polyurethane material. If a long time idling is recommended to dismantle the rollers wrapped to prevent extrusion and deformation.
