How to maintain the inkjet printer in summer?
The best working temperature of inkjet printer is 22-25 degrees. How can we protect inkjet printer in such hot weather? Below we put forward some suggestions on this issue for your reference.
High temperature weather also has a great impact on the ink marks of the printer. If the temperature is too high, it will cause ink flying and fluffing on the printer. It may be that the indoor air is too dry. You can often sprinkle some water on the ground to keep the humidity normal.
1. The control temperature (between 22--25 degrees) is within the range of the printer, so it is time to turn on the air conditioner. In this way, it is easy to break the ink, and the electrical components such as boards and cards are also easy to be damaged due to high temperature.
2. Control the humidity from 40% to 60% in the suitable range of the photo machine. It is not easy to clog the ink.
3. The ground wire eliminates static electricity and other interference to the machine. For the nozzle, pay attention to anti-static and anti-dry ink phenomenon, and check whether the printer is grounded.
4. The cleaning of the nozzle is also very important. Regularly clean the nozzle of the nozzle with alcohol.
5. The sliding body of the car: Wipe it daily, add alcohol with a clean cloth or paper towel;
6. Ink wiping cartridge (cleaning ink stack): clean it every week, it is best to remove it for cleaning, do not lose the ink wiping sheet and return it to its correct position;
7. Grating strips: clean weekly, observe daily, wipe up and down with cotton swab + water or alcohol, do not work hard;
8. The contact sheet between the ink car and the ink head: check daily to ensure that there is no ink stain, and prevent excessive alcohol from dissolving micro-electricity
9. You suggest to use original ink instead of mixed ink;
10. Do not plug and unplug the printing line while it is live, otherwise it will cause damage to the main trigger;
11. It can cause ink hole blockage;
For the above and cleaning and maintenance work, it is recommended to use a special cleaning solution to maintain the nozzle and maintain the photo machine.
